Question about KitchenAid Food Mixers
...mixer only works on high speed. My kitchenaid K45 mixer only works on high speed. What should I check to correct this so it will work with the slower speeds. Hiya, I am sorry to hear you are having ...
...mixer. if the mixer only works on one speed that is not high speed then you need to adjust or replace the speed control plate on post 1978 mixers and the capacitor on pre 1978 machines. Hope that ...
mixer works on high speed but not low. Brushes mixer works on high speed but not low. Brushes for motor look worn on this 12 year old mixer. Motor brushes are fairly cheap to buy. It sounds like the ...
...mixer at any speed, it ramps up to high speed and then shuts down after maybe 30 seconds. You need a reputable repairman. My gears were stripped after trying to mix a very thick dough. It would only ...
Question about KitchenAid Food Mixers
...mixer has any speeds working except only high (only high means it is the phase control board) then it is more likely the speed control board is bad rather than the phase board. Can you send is more ...
...mixer will only work on high speed why Speed controllers reduce the power provided to the mixer motor and have to "soak up" some of the power not used. If the mixer was used on low speed but heavy ...
Question about Food Mixers
accidentally set the speed of my mixer to a high level, the mixer broke and when I plug it back in it runs even if i set the speed to 0. The speed controls dont work anymore. We need a Make and Model#
Question about KitchenAid Food Mixers
Mixer only operates at high speed regardless of the speed setting It appears the speed control is not working. Is this a common problem? the triac solid-state component on the board for the motor ...
...mixer will only operate at high speed. Can you help me? Please note: my mixer moded is the one note above as a model 12C, 150 watts. I could not enter the model number in the product area below. When ...
Two positions on the three speed switch do not work. The high speed or position three is the only speed that functions. The problem is covered on this link
349 questions posted
Usually answered in minutes!
493 Questions
357 Questions
205 Questions
183 Questions
89 Questions
