...location of drain plug for m80. I need to drain the fluid from the mixer head so I can replace the side control panel gasket thanks Look behind where the dough hook is near the pedestal,its a three ...
...the cabinet door under the sink, you should be able to see the disposer motor. On the bottom or side, there should be a small bump that is the reset button. Push the button in and it should work ...
...screw to top cover threads into put new oil in there till you hit line in sight glass on right side of
when plugged in for a while? Does the motor have a starting capacitor? Look for a metal tube on the side an inch or so in diameter. Those are AC electrolytic capacitors that are a common failure item
I unscrewed the two black bolts on the side of my mixer and two springs popped out. I put them back in and now my mixer will not work at all I had the same problem with the two black bolts on the side
...there will be a box or removable plate on the motor with 110 Volt and 220 Volt connections inside. You would need to replace the line cord with a 220 Volt cord having the correct plug for the ...
KitchenAid KSM150PSMC no power originally the speed was slow. I just plugged in and it popped and spark. Check the carbon brushes first, under the black caps on the side of the motor housing.
plugs on either side and visually inspect that these are not worn. also make sure they go back in correctly because they will only work one way. after inspecting these you can take off the back of the
...lever. In the process I removed the back cap (electrical circuit board) and the two screws on the side (flat, springs with magnets attached). After I replaced what I took off ...my mixer will not ...
...to the speed control board. That will be the black wire and the white wire at the bottom on one side of the control plate. After that check fields for continuity, that will be between the 2 wires ...
614 questions posted
Usually answered in minutes!
357 Questions
285 Questions
205 Questions
183 Questions
89 Questions