KitchenAid K45SS Classic Stand Mixer "black screws side" Questions

Ad

Question about KitchenAid Food Mixers

1 Answer

...starts then stops Check for broken wire under back cover. Check operation of switch contacts on black speed control plate. Check carbon brushed under black screw caps on the sides. The brushes

Ad

Question about KitchenAid Food Mixers

1 Answer

wont turn on Try checking the brushes located on the side of the mixer ,theres one on each side under a black plastic screw make sure you remember how you took them out,put them back same place.

Ad

Question about KitchenAid Food Mixers

1 Answer

...back cover off, black wire and white wire off the control board (both on the same side at the bottom) undo 5 screws under planetary, undo 4 screws remaining in housing underside. Split

...black wire from lower corner of speed control plate, both on same side on adjacent terminals. Remove the gasket thing at the back as well. Remove chrome drip ring from around planetary, knock pin out ...

Question about Kenwood Food Mixers

1 Answer

...black wire going from the plug to the inside of the Kenwood Chef a701a has broken off and I do not no were it go's to the Red one is ok and attatched many thanks WHERE THE WIRE GOES INTO MOTOR THERE ...

Question about KitchenAid Food Mixers

2 Answers

black screws on the sides. Springs came out. I replaced them, i thought the right way, but my mixer won't work. What did I do wrong? Or, more helpfully, take them back out.  Look in the hole, and

...it got something to do with the two black screws on the side do they need to go in a certain way? Cheers josh Did you remove those two screws? If so, Read my post on the one that did the same

...black screw caps one each side of the motor. Note that the brushes have one corner shaved off, they only fit properly one way. Remove the back cover (one screw at the top) and check for a broken or ...

black screws on the side. They are keyed with one corner of the square ground off so will only go in properly one way so eyes open when you take them out. If they are less than 10mm long replace them.

black screws on the side. They are keyed with one corner of the square ground off so will only go in properly one way so eyes open when you take them out. If they are less than 10mm long replace them.

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

614 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...