...motor and move the speed lever, there is no movement or sound of the motor shaft. In the K5SS parts diagram I see a circuit breaker but cannot find it in my mixer. Any suggestions? Bud Smith ...
...speed control switch needs to be replaced and you are probably going to have to do a rewire job on the wires that got welded to the frame, this really requires a trained tech to repair. If you do it ...
Question about KitchenAid Food Mixers
...motor windind. It should normally read 0 ohms with no polarity. Other than that, since I get the impression that you are comfortable with tools, you might try using a VOM (or continuity tester) to ...
motor was not coming up to speed. Tripping the breaker is probably a direct short circuit. It sounds like the initial problem was with the contactor but running equipment with a "chattering" contactor
...motor) shaft by removing the small 2 inch cover and getting a wrench on the nut and spinning it by hand. The handle you mentioned with the three numbered selections are your speed settings and ...
...speed settings were under control while the movement continued. I will update this note if I have any problems with this mixer. After hit and-miss-take-apart I discovered a simple solution to tweak ...
457 questions posted
Usually answered in minutes!
493 Questions
285 Questions
205 Questions
183 Questions
89 Questions