KitchenAid KSM150PS Artisan Series Stand Mixer "oil new" Questions

...I put the oil in? Only the rear bearing takes oil. The rest takes grease. See the Service Manual ...

...has an oil leak. Need Seal kit/repair parts info and type of oil to replace. You need to take the old grease out and replace it with new and then replace the oil seal by the way it is ...

...I found the drain plug but I can't find where to pour in the new oil. Take the top cover off,where the front screw on the cover goes in that long shft has to be unscrewed,get a funnel and add

oil it is because the grease is broken down .you have to pull tpo cover off mixer remove trans. parts clean out old grease clean all trans. parts reassemble put top cover back on .then make sure mixer

...new. The oil that's leaking is harmless as it is special food grade grease in there. If you choose to replace the grease you should be buying and using KitchenAid food grade grease. A KitchenAid ...

...time if not clear would recommend replacing glass remove top cover where the front cover screw theaded into remove that is your fill hole. add new oil till you hit level line in sight ...

...oil before you dry out the gearbox and ruin it The grease breaks down from age and the thin oil leaks past the seal, go to Ebay and buy new grease ($10) and replace it, Youtube videos show you

...breaks down and oil separates from the grease solids. Eventually the gearbox will need to be repacked with new grease. Don't worry about a drip or two in a cake, it's food grade grease so

...oil that is dripping out is the liquids separating out from the solids in the grease. You either need to open it up and stir the grease u again or remove the old grease completely and repack it with ...

...the planetary take out plug let oil drain ,remove top cover take outstand off where front screw to top cover threads into put new oil in there till you hit line in sight glass on right side of