KitchenAid KSM150PS Artisan Series Stand Mixer "magnets side" Questions

took apart, pull magnets from sides, now the thing took apart, unscrew pull magnets from sides, screw them back, but machine don't start ECARRERO2004 - Those 'magnets' you removed from the sides of ...

I took out the two black flat screws on the side of my KitchenAid mixer and out sprung a spring and magnet. When I replacter them my mixer won't start... It sounds like you removed the brushes, look ...

...side (flat, springs with magnets attached). After I replaced what I took off ...my mixer will not start. Hello Lora, I understand that you took you speed lever out to replace it and you took the ...

The small wire for the magnetic bowl-shield sensor came off and I have no idea where it goes. If its not an easy fix is there any way to bypass the bowl hight sensor and the magnetic sensor? You would

Hobart HL600 Legacy mixer will run on stir speed only. The electronic speed control board on this machine was replaced with a new one. When tested, it only runs on stir speed at any speed setting. ...

...side with your hand.. Make sure the switch is on high. Tap it several times if need be. This is to straighten up the brushes to where the springs want them. When the motor starts turning, slight taps ...

side screws which landed up being a magnet with a spring. I did remove both to see what conditions the magnets where in. There was a very small amount of metal shavings. I put both magnets and springs

KitchenAid K5sswh mixer after replacing plastic gear-no power After replacing melted plastic gear, mixer will not power on. Zero power. Could the large black spring loaded magnetic screws on the sides

Springs on side under black screw, came out I tried to look under the black screws on the sides. Springs came out. I replaced them, i thought the right way, but my mixer won't work. What did I do ...

will not turn on was working fine then had to tap top of it to come on but know it wont come on at all could it be the magnet Undo the black plastic caps, one on each side. You probably need new ...