KitchenAid KSM150PS Artisan Series Stand Mixer "magnetic brushes" Questions

took apart, pull magnets from sides, now the thing took apart, unscrew pull magnets from sides, screw them back, but machine don't start ECARRERO2004 - Those 'magnets' you removed from the sides of ...

took brushes out to check and cannot get kitchenaid mixer to work. Look at the brush from the side.. The surface that rides on the armature is curved> One leg is longer than the other leg. The long

Well, I was attempting to replace my speed lever. In the process I removed the back cap (electrical circuit board) and the two screws on the side (flat, springs with magnets attached). After I ...

will not turn on was working fine then had to tap top of it to come on but know it wont come on at all could it be the magnet Undo the black plastic caps, one on each side. You probably need new ...

magnetic screws on the sides of the mixer" are your mixer's brushes, which supplies electricity to the electric motor. (The black cap is the brush cover). I suspect that one or both of the brushes is

Assembled parts incorrectly Hi, I removed the large plasting screws on both sides of my Kitchen aid KSM5PSGR mixer and removed the magnet looking ractangular rods. I noticed that there is a notch on ...

KitchenAid model K45SSWH doesn't work I thought I was removing the top of the mixer to see why my mixer was leaking oil/grease only to find I was removing the magnets(?) around the motor and now it no

I took out the two black flat screws on the side of my KitchenAid mixer and out sprung a spring and magnet. When I replacter them my mixer won't start... It sounds like you removed the brushes, look ...

Won't turn on - even after orienting the magnets I recently decided to open up the various compartments on my mixer... A friend dropped my mixer when she borrowed it; it had been over one year since I

I have kitchenAid KSM150PS. I was grinding Chicken, which I've done many times before. This time the motor began to strain to the point that it did not sound good. I turned the unit off, let it cool ...