KitchenAid KSM150PS Artisan Series Stand Mixer "kitchen aid remove beater" Questions

kitchen aid--heavy duty mixer cannot release(remove) beater The beater is held in place by a pin and spring arrangement. Lift and twist the beater. If that doesn't work, the pin is trying to come out.

Kitchen Aid stand mixer head doesn't lock down and wobbles HI, I have a small problem with my Kitchen Aid, which I'm sure there is a simple solution for; the head will not lock down when ...

...Kitchen Aid mixer. There is probably a build up of dough/cake mix etc inside the hole where the beater fits into. Fill a mixing bowl or a jug deep enough to fit over beater with very hot or boiling ...

Kitchen Aid switching from mixer mode to grinder I dont have the instructions on how to switch from the mixer mode to grinder. There is no switch. When you have the accesory in the front, the beater ...

...to fail is cheap. Here it is on amazon.com: http://www.amazon.com/KitchenAid-W10112253-Worm-Gear/dp/B0006HLAVA http://www.misterfixit.com Kitchen Aid Mixer KSM150 motor runs but beater will not

remove the beater Just used the mixer....now can't remove the beater Push up and twist at the same time. 90% of the time a stuck beater is due to "Gunk" buildup. Most of us clean up the mixer but fail

Kitchen Aid 300 decorative silver ring around where beater attaches just fell off when I started it up today. Do I just glue it back on? yes, though not too much as it must be removed again if needing

Having trouble removing beater from shaft... HELP These are held on with a bayonet attachement. You need to rotate the beater to disengage from the shaft. I would recommmend using a brass pin punch ...

Please help me get the beater blade out of my mixer!! your going to have to do some quik jerks, I have seen this plenty of times, has beater bars ever been removed or how long have they been sitting

Kitchen aid KSM 150 PSSM Flat beater removal??? I have my kitchen aid ( Betsy I call her! ) for about 5 months. I have waited and saved for a very long time to be able to afford one!! Now, I just made