KitchenAid KCMS185J Microwave Oven "kitchen aid heating" Questions

...kitchen aid microwave modelkcms185jss starts runs fine but does not heat food at all. Does not heat food means a problem on magnetron tube and fuse blown in high voltage area. Have it replaced and it ...

Kitchen Aid microwave over will not heat Lighting for range top blink on and off but all other functions seam to work ok but will not heat anything Common cause of this problem is transformer fuse ...

...Kitchen aid KEMS308SSS04 not heating. Does this midel have a acapacitor probably not. if not heating, either power is not getting to the m.w. emitter or it is burnt out. either way, it is not ...

Kitchen aid kems307dbl4 oven won't heat up. We had our oven on automatic clean and then a power failure during the cleaning. Since then the oven won't heat; the lights work, the digital readout works,

...kitchen aid over the range microwave Model No; KHMS105EWH-0 stop heating. Hi, Here is a tip that will help you to figure out what is wrong with your Microwave Oven.... Basic Microwave Oven ...

Kitchen Aid microwave KHMS105EWH-0: I started to heat a cup of coffee, it momentarily interrupted power to the kitchen, fluorescent lamps went out, then slowly came back on. More below. I started to ...

kitchen aid microwave kbms1454rss clicking When we close the door, the microwave runs then a clicking noise starts and the machine shuts off and never heats at all. Power is normal, the turntable ...

Kitchen aid microwave oven makes louder than usual humming noise and does not heat That would likely be a shorted high voltage diode or failed magnetron. Here are a couple of good help links: ...

...kitchen aid superba range work, but the oven doesn't? Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about your ...

Kitchen aid microwave will not heat first check the fuse if cutoff, replace it. if ok, then check for any broken wire. if all connections are intact, then test the heating element for continuity, if ...