KitchenAid KEMC377K Convection / Microwave Oven "probe beeps" Questions

Have a kitchenaid superba part no. 4450786A with the probe indicator beeping for a temperature to be set. Prior to beeping started just used microwave to warm food; didn't need or use probe. What is ...

...beeps and the display lights up. Mine then displays "BEEF" and shows 160, with 3 blinking spaces. Next, plug the probe into the smaller remote unit. You should get 1 beep, the remote will display the ...

...indicates an oven sensor problem. The oven sensor is most likely the failed part. The oven sensor probe must have the correct resistance readings at specific temperatures. When the electronic range ...

kitchenaid display reads insert temperature probe oven is inop oven does not operate just beeps told this rip off site to go to hell

beeps 2 or 3 times and after the beeping, it will shut off. I don't think I have seen this on another microwave, so I don't think it is normal, but it works great otherwise. It is a used microwave, so

a torch visualy inspect push on terminals for overheating 4.if ok use multimeter on continuity beep probe to mains plug neutral outher to terminal on large mains transformer should beep if ok 5.if all

...beep. I love this microwave and would like to have it fixed if possible. try unplugging it. or the probe might be defective. another trick is slamming the door when shutting it, if this works it;s a ...

...beeps, stops, light goes out, and LED display reads "Prob." "Clear", reentry and "Start" bring same error. If hours or a day go by before restart, the unit runs fine for up to a minute or more before ...