KitchenAid KHMS155LSS 1000 Watts Microwave Oven "stop working cleaning" Questions

...stop. The clock resets, the 30 sec button works, the lights work but the hum goes on Try cleaning the door and seals in fact totally clean the inside .These things do not have a lot moving parts but ...

...does not work I've had this microwave for 5 years and never had any problem. Yesterday everything stopped working, except the counter and turn table. I cleanned out the vents (they were full of

our kenmore microwave stop heating.. Everything works well but it just stop heating last night after l cleaned it.. did I do anything to it?? Hi, Here is a tip that will help you to figure out what is

A new Oster hair drier used about 3 times but stopped working today. Gets over heated within seconds & stops. I need helpful tips on what to repair. No warranty outlet in my country. Most commonly, ...

...working and showing DOOR when Start is pushed. Model number: E150072SP Clean the door sensors: If your microwave is showing "DOOR" when you press start, it's possible that the door sensors are dirty ...

...occurs. plz HELP! If the clock is not set, nothing will work as the controls require the time to be working. Press Clear/stop twice and press clock, set time and press clock again. Hope this

ge spacemaker microwave jvm1640cj03 stopped heating. interior always clean. light, timer etc working. If it stops heating and the other parts of the oven still work, the problem is with the magnetron ...

samsung microwave 5370 buttons stopped working The touch-sensitive buttons on the front of my 1997 samsung microwave 5370 have stopped working. It was acting a bit cranky, but I found for a while if I

working but the stop and clear is not working i would have to open the door for it to stop, the vent and a few other controls are not working. i need help.. what should i do?? In the future be careful

...working. Keypad is unresponsive and child lock button on the display is showing intermittently with a beep. Pressed the stop/ clear button for a few seconds nothing is happening. Unplugged the ...