Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489 "spray gun tips" Questions

are using a high pressure tip on the gun while trying to spray detergent. The only way the system can pull the detergent into the water stream is if you are using a soap tip (usually black) on the gun

...gun and hardly any water comes out. turn it off and there is pressure coming out Have you tried pulling the spray nozzle tip off and checking it for blockage? The spray tips have a tiny hole for the ...

...gun, hose or nozzle-tip. The reason for pressure buildup killing the engine might be a stuck unloader valve in the pump. While you are checking each component of the "output" side, spray some ...

...spray gun open so water is running out tip and pull rope to start (for easy start, remove tip from gun) . If it still feels very hard to pull rope while holding gun open, most likely problem with ...

...spray from the gun each time it surged. In other words it would do nothing. Please help... very frustrated. Thanks Sounds like the problem could be low input water flow or pressure. There could be ...

...spray wand to high pressure. Clear any debris from the nozzle. If the nozzle has even a little bit of dirt in the tip, it may cause enough obstruction for the pressure washer to pulsate. If your ...

if the unit has a good deal of hours or if machine is left running for long periods of time without spraying. Try lubing the internal parts by removing both hoses and installing a short piece of water

gun remove the fitting inspect check valve it may be stuck open Frank, either the unloader valve is out of adjustment(try loosening it off) or it is faulty and needs rebuilt or replaced as most people

...spray gun handle in the open /on position allowing water to flow thru. Allow the engine to run for a while to warm-up. Increase the pressure a small amount at a time to reach the desired pressure. To ...

...gun is closed. First, a lack of high pressure can be caused by: 1. Insufficient water feeding to the unit, so check that the water is turned on all the way and that there are no kinks in the hose. 2. ...