Husqvarna 562xp Auto Tune 24" Chainsaw "stops trying cut" Questions

drive or broken. 3. Clutch behind the drive sprocket on the cutting head may need tightening. 4. Chain too sharp/aggressive and is trying to cut too much and the stopping the chain. 5. Chain too tight

...stops when you try to cut! My balck and decker GK430 chainsaw has a problem. The elecrtric motor whirrs up fine, but when you try to cut the chain moves for a short time then stops cutting. The motor ...

i have a dolmar ps 52 chainsaw keeps cutting out when warm any ideas thanks Try a new spark plug first. The ignition system may be failing with heat. Try cleaning the engine with compressed air to get

I have a brand new 45cc Homelight 18" saw. Statred up great and cut good for about 20 minutes. Stopped and would not restart. Tried i hour later ran for 5 minutes and stopped. any ideas? Try loosening

water wouldn't not stop used a half of loaf of bread. This has to be the most interesting problem I have ever seen... Chainsaw, water that won't stop, and you used a half loaf of bread... I ...

I have a 18" Craftsman gas chain saw. It will not keep running, after two or three cuts it just stops and cannot be started again until it sits for 15 to 20 minutes. I have cleaned the air filter and ...

...stops when cutting with my husky 440 16'' is is normal for the chain to catch or stop do I need carb adjust or is it just under powered? Chain and saw are new It's hard to say. 41CCs should handle a ...

trying on the wrong side. All chain teeth need be of equal size and opposite angles else it will cut at an angle. There is a wealth of information publish by a company that has been dealing with chain

my stihl chainsaw will only cut half way through a 14 inch ie branch and won't go any further chain still going but seems to heat up the chain as well tried new guide bar but still doing the same ...

...cut engine is runnig but chain stops when touch the tree Hi Pam: Using chain saws takes a bit of getting used to, and it can be DANGEROUS. - The chain must be sharp to be able to cut properly, and a ...