...tool. Most of the screws that you have to remove are on the back of the machine. There are three special oval head screws + four torx-head screws + two Phillips screws on the top of the
Question about Hamilton Beach Coffee Makers & Espresso Machines
...special driver to remove them. Once you figure out how to get the screws out check the orange hose. If you feel it there is something inside the hose. It is a special one way ball check valve. It may ...
Question about Krups Coffee Makers & Espresso Machines
...special tool as Krups seem to design things that are impossible to service yourself. Yes it is tricky but easy once you know it. remove the bean container by pulling off the grind selector knob and ...
Question about Nespresso Coffee Makers & Espresso Machines
...special hex key to take off the nozzle part. Here is my fix--Remove the water tank-Turn the whole machine upside down. You want to remove the stainless steel square plate that holds the ...
...special tool to remove the diffuser head. It' a very small spanner wrench that turns the special screw. I was able to make a spanner out of a screwdriver, but I'm a toolmaker by trade. Your best bet ...
Question about Krups Coffee Makers & Espresso Machines
...remove the Jura crest by turning it clock wise. I use a piece of ruber pressed against it to help. Then you will need a special screwdriver for the oval shaped screw heads. I ordered the screwdriver ...
Question about Black & Decker Coffee Makers & Espresso Machines
remove the special screws. After that, you will need a phillips screw driver as well. Remove all the screws, some are hidden underneath the plastic grip pads on the bottom as well. You will observer a
...special tools that I will talk about as I describe how to get to the sensor, make sure you get those tools or something similar. The problem that you are having is the boiler is not heating properly ...
Question about Krups Coffee Makers & Espresso Machines
...special oval screws (I don't have the tool). Is there any other way to fix this problem? I believe once I remove the back panel and clean out the grinder and the dispenser it would be fine??? Please ...
remove the special screws. After that, you will need a phillips screw driver as well. Remove all the screws, some are hidden underneath the plastic grip pads on the bottom as well. You will observer a
33 questions posted
Usually answered in minutes!
208 Questions
72 Questions
45 Questions