Krups FME2 Coffee Maker "setting timer" Questions

how do i set the timer for the coffee maker and set the time too? I set the time and it doesnt let me set the timer for the coffee mader The on-timer is a little weird--you need to set the turn-on ...

...Setting the timer is a piece of cake, Hold down the program button until the clock flashes. While still holding the program button down, set the timer for whatever time you want the pot to perk. Let ...

...timer setting. Pay careful attention to match the am/pm button with what you want.- if you don't you will be 12 hour off. To use the delay, set up the coffee pot, then push time. The red time ...

How do you set the timer on mr coffee maker ? Set the clock, then set the brew time. Videos and text based articles https://www.google.com/search?q=set+the+timer+on+mr+coffee+maker ..

Timer for pre-set does not work I can turn it on manually - but cannot use the timer - all the functions work as far as programing but in the morning no coffee until I hit manual. david_mclain@hotmail

not filling to capacity In most cases there is a digital timer on the machine or a manual timer. The timer should be located behind the panel behind where the container sits below the funnel. If it is

...timer is only good for 1 setting. Turn dial and brew once to check. Keep checking with a brew after each adjustment. Do a final brew just to be sure. * The digital timer is a bit more complicated to ...

need instructions how to use preset timer on aroma 12 cup coffee maker have second hand machine and can't work out how to set the timer for my morning coffee I never really use this coffe maker. ...

Setting Auto Off (units with timer only) On models with a glass carafe, the auto off can be set to shut the coffee machine off from 1 - 5 hours after the brew cycle is complete. The factory setting is

Can set at 1/2, 1, or 1 1/2 gallon and get only 2 Can set at 1/2, 1, or 1 1/2 gallon, get 2 cups of water brewed. Press switch again and get only 2 more cups. Is the timer board broken or what??? ...