Question about Pass & Seymour Electrical Supplies
...ceiling box. What is known: You are replacing single pole switch attached to one 14-2 wire going to light. You are replacing light with a fan-light and replacing switch with a 3-pole TM8111 switch. ...
...replacing the 3-speed switch? This is a field with much discussion because Westinghouse 4-wire fan switches vary. Process of elimination is needed to find hot line. From there you test each wire to ...
Question about Westinghouse Electric Electrical Supplies
...replacing a faulty, pull-chain, 3-way fan (Hunter ceiling fan) light switch I unfortunately misjudged my memory and am not sure which of two connecting, wire-splice nuts the red wire from the new ...
Question about Westinghouse Electric Electrical Supplies
Replacing a pull chain 3-way ceiling fan light switch The ceiling fan has 4 spot lights. My 3-way switch has 3 wires - Red, Black, Blue. Inside the light housing - There are 4 thinner black wires that
Question about Speed Electrical Supplies
ceiling fan I believe I am returning the wires to their appropriate positions but I only get a hum from the fan when I turn the main power back on. Inside the fan I have purple, yellow, gray and black
fan motor are two windings. Winding 1 for low speed. Winding 2 for medium speed. And when both windings are combined, that makes high speed. You have to test your switch. Usually the hot lead connects
fan and the other controls three separate lights (a set of pot lights in the ceiling, vanity lights and a ceiling light). I bought a 3 rocker switch hoping to have separate switches for each light but
Question about Leviton Electrical Supplies
...ceiling box as chandelier to be used to control a fan, except you don't have a fan. In the second case, if you install a fan with a light, you could control fan and light separately. The green is a ...
Question about Leviton Electrical Supplies
CEILING FAN.. I HAVE A RED WIRE A GREEN WIRE TWO BLACK AND TWO WHITE .. AND TWO BARE GROUND WIRES... Andrea, There are two issues here. The red and green wires are not standard, so rather than assume,
...fan switch that I am replacing. I put the wires back in the same order but I am only able to get the fan to turn on to low with the first click and it turns off for the other three clicks. I already ...
69 questions posted
Usually answered in minutes!
32 Questions
32 Questions
23 Questions
19 Questions
20 Questions