Leviton Decora Light Dimmer Switch "remove wires" Questions

...1 wht wire coming down thru fan to 4-light kit - replacing 2-wire pull chain switch, but (dummy me) removed old b-4 noting how wires were connected - 2-blk wires off switch: if 1 goes to blk (hot) ...

...remove glue from wires/cables. The wires have now come off and I need to restick the wires to the skirting but first need to remove the old dried glue try nail polish remover, or cigarette lighter ...

...wires together. if so, remove them set the dimmer aside. you should be working with two black wires in the wall. What ever is attached to the dimmer is the wires you will be using. It does not make ...

...setting two - L+1+2+3, etc.) Do you have that? I can offer resources: 1) Test switch that was removed, and test for hot connection to narrow down options. What speed was fan stuck in when

...then you need to replace switch. You need to turn off the breaker or remove the fuse powering that switch first. remove the wires from switch, and put wires back at the same screws on the new

...button to check the wires remove the square white pad from the wall staion and you will find a screw. remove screw and lift up on entire wall station, it will come off the wall, wires are in the ...

remove all wires and cap off each wire, then take timer home and put on your lights or pool pump. Basic 120volt timer is worth about 40$+. 2) If you do not have access to circuit breaker, you can risk

...Remove wires from switch.If wires are attached into holes on back of switch, notice there is small slot next to each hole.Insert small screwdriver or metal nail file into slot while pulling on wire. ...

...wires and told me it would work but I am not sure how to rewire it.Any help would be appreciated. Dear sir first do not confuse by the colour of ballast wire, now see black and white wire who is ...