Heath Zenith SL-6136-WH Basic Solutions Wireless Switch and Plug-in "motion light shut" Questions

...motion detecting light switch on a panel that also has a fan switch. In my bathroom I have a light switch with two switches. One goes to the light and one to the fan. I want to put a motion sensor on ...

...motion almost all the time. If it's in test mode - it will shut off but otherwise it keeps sensing it. This is in a garage - and door open or closed does not seem to affect it. I have the same unit ...

...light on the motion detector is blinking but the lights do not go on, even using the manual over ride. I have this problem every now and then. I just fixed mine - knock on wood. I smacked it lightly, ...

I have the cooper K6107v-l motion sensor. Is there a way to adjust the time delay? The device shuts off after about 3 seconds, I want it to stay on for 5 minutes. under the cover,of the device ,pry ...

...motion activated light control, flickers, then blinks then shuts off after installation. Installed in a hallway with florescent lighting. Some switches are not designed to work with the florescent ...

...motion sensing lights and put two of them on my garage, i wired them from a switch to either side of the door on one circuit allowing them to be individual sensors but i keep getting a very faint ...

...motion detector is toast, probably from a voltage surge associated with your power failure. Since you have already used the manual switch, you have already tried the "reboot" option, but here is ...

shut and then the up ward motion on the door is so hard I have trouble unlocking it so it can open. Ive tried to adjust the cables but thats not working either , also I bought the new springs from the

...WH-E The line voltage may be low.  it is possible the bulbs are too great of a wattage for the motion circuit or branch wiring.  It is also possible the relay got wet and formed a layer of ...