Lincoln Electric K1297 AC/DC 225/125 Stick Welder "old welders" Questions

I was just looking at an old forney welder and was wonder if it was a dc welder..Big red welder with low-med-high heat ranges... 5-250 amp, spec no 16 u 25, has a 6 volt dc and a 12 dc charger. any ...

...should be around 30 to 40 volts. If yu see the normal spark from the rod as you strike, but cannot hold an arc, have a look at your rods, they could be old, damp or incorrect for your welder or the ...

whats making the fan on my welder not work whats making the fan on my old Lincoln tombstone welder not work The fan motor has probably burnt out, i see this alot...make sure the connections are good..

I have a older lincoin ac225s welder I got this from a old man that said it worked . well it has no power cord on it and my question is is the ground wire connected to the point where the ground from ...

to verify the plug is getting power on teh desired pins. where does green and white wire connect on old lincoln 220 stick welder it had no power cord when i got it,

I've got an old Lincoln K1170 AC-225 welder that is missing the power input cord. I need wiring schematic of how to attach a new power cord. Wouldn't it be easier to just go to a welding supply in

need the diagram for an old welder, ac/dc 125/225 need to find out how to hook the fan up Usually the fan if it is, 112/225V. It simply connects across the Line, Phase to neutral, but AFTER the mains ...

how do you wire the old lincoln 225 ac welder What are you wiring? Power Cord? Fan? Transformer? You should see a white wiring block in the lower right corner if you are looking from the back. On the ...

Where do I find a replacement cooling fan for a lincoln 225 stick welder? I took my old one to Grainger and they ordered a new one that is 230V. Total cost of motor and fan $27.00

Looking for manual on an old Burket Manufactured Champion Twin We have an old Burket Manufactured Champion Twin arc welder (140 AMPS) We are looking to locate an instruction manual for the welder call