Rheem RUUD ELD40 Water Heater,electric,40 Gal,208v,4.5kw 3CFG6 "elements 30 gal" Questions

Ad

...30 gal, but most heaters have 2 elements. If yours starts out too hot then runs out, Blame the element, or check the breaker with a meter to make sure you have voltage to both legs of the 220 volt ...

Ad

...30 gal short water heater. It only seems to put out about 10 gallons of hot water before it starts going cold,any suggestions...... I am assuming that everything was fine and then all of the sudden ...

Ad

has a lower access panel. How do I access the upper heating element? If your heater only has one access panel, then it only has one element.  These are mostly in the 30 gal. electric models. 

Question about Rheem Water Heaters

1 Answer

...30 gal electric hot water heater. Frequently making sounds like a squirrel is inside the tank. Today I drained the tank and still have the sound. Any ideas how to get rid of the noise? Hi, The noise ...

Question about Rheem Water Heaters

1 Answer

...30 gal model #82v30-2 and conected the cold and hot water inlet and outlet backwards and then activated the electric power to the water heater. After 5 or 10 minutes realized the mistake and i did ...

...30 gal tank, where to purchase Wheres the part number and Where can I purchase a heating element for a Reliance Electric 501 Hot Water heater. You do not need special parts.Wattage is printed on end ...

...same time. So non-simultaneous water heater with two 4500 watt elements has total connected watt rating of 4500 watts. Because only 1 element can be ON at a time. Use 30 amp breaker and 10 gauge

Question about Rheem Water Heaters

1 Answer

...gal. tank and installed, even a new 30 amp doulbe pull breaker and this tank does not give out any hot water. Temp turn up all the way to about 140 Hi, The next thing you need to do is find out ...

how do i replace the heating elements of a rheem model 71-305 electric water heater Not familiar with this model but most are generic. Turn the water off; Release the pressure with the pressure relief

have 110 volts on both sides of my new heating element and still no hot water 30 gal. single element Look at the circuit breaker for the heater, one side is tripped. You should get 240 on the element.

Not finding what you are looking for?
Rheem RUUD ELD40 Water Heater,electric,40 Gal,208v,4.5kw 3CFG6 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Rheem Water Heaters Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Rheem Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...