...flow of gas and the burner should light - unless the gas jet is blocked or something else, some other type of blockage is preventing the flow of gas to the burner... I suggest you check the gas jet ...
...gas flow to turn on than the water heater requires. A central heating system requires substantial gas flow so when the monitoring valve opens to fire the central heating, there is enough gas flow to ...
Question about Water Water Heaters
...flow. It is a gas appliance so has to be worked on by a certified gas technician. Call for service. ...
gas flow to the burner either a badly adjusted regulator or a blockage in the gas tap or line.. You control the temp by the amount of water coming out of the tap as you found out when you attempted to
...flow sensor? I have gas, and gas is getting to it, i dont know if there is some sort of gas valve immeditately inside the unit restricting gas from being ignited tho, but the house does have gas. ...
...the hot water it is still cold but I can hear the system turning on please help? Most probably the flow switch that senses water flow and opens the gas and turns it on is stuck due to not being
Why would gas stop flowing to the water heater? if thermocouple goes bad(pretty common) then pilot light goes out and gas stops flowing.
...thermal coupling. The coupling is a temperature sensitive sensor that works with the pilot and controls the flow of gas. If it does not detect heat after a certain time it will shut down flow of
...gas flowing when you push in on the ignition start button? -- There should be a spark as you 'snap' the button? Remember-- YOu get no ignition of the big flame, until you have water flowing-- How old ...
3 questions posted
Usually answered in minutes!
2 Questions
1 Questions
1 Questions