Black & Decker Simple Start Car to Car Battery Booster  "charge" Questions

how do i read a full charge on the se-82-6 charging a lead acid battery The battery is fully charged when the gauge reads zero. If you look at the meter, the charge meter of 100% is slightly

...for a ''Challenge'' jump starter for Cars. The red switch on the model has three positions OFF/CHARGE/ON. I need to know which switch is to recharge the car battery and not charge the actual

...use either, but 10 amps is the faster charging rate. I personally prefer to start out on the 2 amp charge for several minutes to condition the battery, then change over to 10 amps for the remainder ...

On my unit the guage does not seem to move upward as the battery charges or is the line to the far left indicate a fully charged battery The meter on the charger indicates how much power the charger ...

...and it's a piece of ****. The only time I had to use it it didn't work as it was to be fully charged. I remarked that it discharged by itself in my glovebox. I tried to charge it, but when I ...

I have a vector 300 amps that will not charge or hold a charge.This is the first time i needed a jump and did not work!It must be a MANUFACTURER DEFECT.What to do? Your Customer I would like a replac ...

Why is it making a humming noise The charger is plugged into the auto for charging and it making a humming noise If it is humming ONLY when you connect it for charging and does not hum when you have ...

it is not chargeing nor turning on Some of these chargers are automatic to the point of aggravation. They will only operate when they are connected to a battery with at least a small residual charge. ...

...don't know how to read the meter. As the needle goes upward, it seems to indicate a lower percent charge but more amps. I.e., when it's charging 6 amps, it looks like it has zero percent charge. ...

read the guage,when do i know battery is fully chargrd or battery wont charge?se-82-6 read the guage,when do i know battery is fully chargrd or battery wont charge?se-82-6 When the amp meter reads 0, ...