Ace Hardware InSinkErator Badger 5, 1/2 HP Garbage Disposal "new disposer makes" Questions

...wobbles, it will loosen drain pipes under sink and cause dripping. I wrote some tips for installing new disposal, and include them here since disposal will be replaced at some point. When I worked ...

...makes humming sound for few seconds but does not rotate blades. Use a broomstick handle to see if disposal blades rotate freely If blades are stuck, use broomstick to wedge blades free. If blades ...

...steel connector disk that holds disposal to sink basket, and disposal comes off. Before installing new disposal. Attach electric wire to new disposal, and push in reset button. Attach dishwasher

...at disposal. If reset is tripped out and won't reset, then disposal is bad. Tips for installing new disposal: Here are basic disposal parts: 1) Sink basket that connects to sink and is held with

makes clicking sound to indicate that you have power, and reset button is not tripped out, then disposal has gone bad. If unit still looks new, then buy identical disposal from store, replace just the

...3) In event of bad disposal, I wrote installation tips. These tips do not include installing new disposal and taking old one back in same box as if it was a defective product. When I worked ...

...or pop the drain line off, making a mess. IF it is a new disposer, and has never been used, you'll want to make sure theat the casting inside of the outlet tube is cleaned out. best regards,

...makes humming noise, I deciided to try and fix it using a allen wrench to turn the flywheel until it turned freely, When it came time to reset it using the reset button I noticed unlike most disposal ...

makes grinding noise, as if glass or metal is in it; I've checked and checked and see nothing; what could be causing this problem? Thanks, Geno_3245. Another thing you may be able to try is this:

...makes sound, then electricity is good. Check that the switch is good and that circuit breaker is not loose and shorted. Use wood broomstick down into sink opening, or use allen wrench on bottom of ...