Question about Ace Hardware Electrical Supplies
My unit has power and the flywheel rotates by hand, but only hums when you turn on the power? The rest button is not jammed either IS IT WIRED BACKWARDS?
...you have but I assume the two identecial screws are on the same side. Put the one with the wire down, then hopefully when the switch if moved up it will turn or, if backwards just rotate the
Question about Leviton Electrical Supplies
...switch is wired backwards. Swap sides with the wires. If you look closely at the switch you will see that one side has 2 screws that are joined together with a metal tab. _That_ is the side that gets ...
I have a Badger 5 (5-81A). The motor is humming when it's turned on, however, the blade does not turn. The blade does seem to move freely. Tried reset and hex key but still nothing. you have something
Question about Ace Hardware Electrical Supplies
I have an insinkerator Badger 5 that is making a loud noise. I can see that there is a piece of white plastic wedged in there - probably a toothpick put in by mistake - I detached from sink and the ...
Question about Fantech Electrical Supplies
...switch off with increasing humidity!! What have I wire wrong? You wired it right, but your expectation is backwards. This device is intended to turn ON your fan or dehumidifier (or whatever) when the ...
turning it backwards to free jammed material. Then with power off, take a flashlight and look inside to see if there is anything in the disposal. You can use tongs or long needle nose pliers to remove
My Intermatic T104 stops cold at the time the timer should trigger the pump on. Looking at it, I think the issue is that the lever that the on and off trippers hit to turn the pump on is worn and the ...
Question about Ace Hardware Electrical Supplies
I have installed a garbage disposal under my sink (Badger 5). It is not new, about 2 years old. Brought it from my old house. It worked great before moving it. I wired it in myself. It works when ...
Question about Miller Electrical Supplies
Ihave two miller Bluestars both have run but when I have two Miller Bluestars, both have run but when shut off and tried to resart will make about half revolution then acts as if valve is stuck and ...
734 questions posted
Usually answered in minutes!
3 Questions
1 Questions
2 Questions