Question about Hansgrohe Home
...flushing problems. I've just fitted a Nabis breeze toilet and I think the water level when flushing, rises to high and is causing flushing problems. The waste pipe is routed under floor boards before ...
I have a Duravit Starck 2 toilet cistern which is approximately 5 yrs old, recently water from the cistern runs constantly into the bowl. I have renewed the flush value without any success. I would ...
Installed a new Kohler model K 4350-0 floor mounted elomgated toilet with no apparent problem. Installed a Sloan Regal flushometer with no apparent problem. I have no leaks, and it appears to flush ...
Problem with a PF/2 Energizer (pressurized) toilet. After the flush and the refill... a small stream of water keeps sipping and hissing out from a small tube located towards the bottom of the housing ...
Igenium Flushing valve will not shut off. I have an Kohler toilet with the ingemium flushing system. The toilet worked fine up until yesterday. The problem is that the fill valve will not shut off ...
dear sir/madam. when flushing toilet it takes a dear sir/madam. when flushing toilet it takes a couple of go,s it does not seem to have enough pressure when flusshing. Some water saver toilets are ...
Question about Moen Home
I had a toilet that was constantly flushing. I read online that is was the solenoid but I wanted to make sure. I took a solenoid off the other moen flush valve I have and put it on the broken one. It ...
...out of level then use a snake rotor to clean any mess in the bowl then flush this should solve your flushing ...
20 questions posted
Usually answered in minutes!
80 Questions
45 Questions
41 Questions
21 Questions