Oster 76076-010 Hair Trimmer "clippers open" Questions

How do you put on a blade when you took it off? There is a picture of an oster clipper in the picture so I assume you are talking about an A5 style blade/clipper. Hold the clipper with the hinge ...

how do I put size 4 blade on clipper The A5 clipper should have a locking hinge the hinge should be open and slide the clipper blade onto the hinge, now push on the clipper blade bachward and it will ...

...Clippers smoke afer a few uses ,I am going to open the clipper and use a electrical cleaning solvent and oil them again and see if this help. How do I do maintanience on my clipper to keep them ...

clippers but can't fit them back on. Please help !! With the hinge of the clipper facing you: Make sure hinge is open, if it is not, prize it open with a flat head screwdriver. Slide the blade on with

I cannot get my blade back on my A5 Single speed clipper..What am I doing wrong??? The drive arm is probably not aligned with the corresponding opening in the balde. You have to close the blade ...

...clippers. There is an open between two adjacent pads, is the armature bad? Before you test make sure your clipper is DISCONNECTED from the wall outlet. before testingYour Andis Master clipper , I ...

...hair. I opened it and clean out hair under blade, but unfortunately, i did not help. With most clippers, after an amount of use they need to be cleaned then oiled. Most sets come with some

Run but will not cut I have an andis a5 clipper that i have changed the lades 3 times and will not cut Are you sure you have Andis A5 or did you mean Oster A5 Clipper, if this clipper is A5 Clipper, ...

...clippers. I have ordered and installed a new blade latch with the same results. It again appears that the latch dodent extend up enough to engage the latching point on the clipper blade. I've ...

The clippers started running intermittently and then stopped running. I opened the housing and nothing seemed burned out and the switch still makes a clicking sound when I turn it on and off, but the ...