moen dn8408ch fell off the wall post. How do I reattach? There should be a set screw on the bottom. Position the holder on the mounting plate and re tighten screw. It takes a pretty small flat head ...
paper holder, so it can be re-mounted? there is no set screw to release it-- the flange has two screw holes on either side of a center hole, and appears jammed into the back of finished brass circular
...set screw on my toilet paper holder. Thought an allen wrench would do to open it but it does not work, I had to use the end of a pointy dinner knife to coax it out, might have also used a flat edge ...
...set screws or any way to loosen it. I called the supplier several years ago and was told the product had been discontinued and there was no info available. It remains a problem for me....so thought I ...
...push with a screw driver?What do you use to remove the holder from the wall? there is no set screw or allen key for this. It is mounted in the anchor bolt by use of a mounting screen, ...
...set screws in the base of the posts to do this. Try tightening the screws holding the mounting posts to the wall. If the screws are unable to hold tight you will need to replace the wall anchors if ...
...to release the base from the wall bracket without pulling out the drywall? There should be a tiny set screw holdng each bracket on the wall. ...
2 questions posted
Usually answered in minutes!
3 Questions
2 Questions