VALUE BRAND press inserts - no brand name assigned press insert,reverse,4-40x3/16 "hour" Questions

Chuck and shaft (spindle?) it was attached to fell off. I have a 1/3 HP Drill Press Model #99-110. I was drilling into some wood and it fell out of the part it slips into. It appears to be a friction ...

parts to a machine shop where the guy said he could make sleeves for $200 because he charges $80 an hour for labor. Hah! So I went back home determined to do it myself. First I cut appropriate lengths

chuck not staying in if the chuck is falling off the taper try cleaning both chuck and taper then use loctite bearing retainer on taper then tap chuck back on and let sit for a couple hours

...one holding the chuck). I find that spraying a litlle penatrating oil on the screw and the shaft an hour before attemting helps about 80% of the time. hope this ...

Old ATOM G.888 Press head comes down and won't stop I have an old ATOM G.888 20-ton Hydraulic press. This press has run near flawlessly for over 20 years. However it's decided to give us some trouble.

how long should it take to reboot a tablet.myhas been taking hours Just Reset it and/or pull the batterys