Where is the reset button on the mac5200 The reset button on these types of compressors is mounted on the outside ridge of the motor endcap on the end opposite of the pump. It may or may not be ...
Question about Craftsman Air Tools & Compressors
...compressor rings shot? Oil free pumps do tend to blow the piston ring (not too expensive) available at searsparts.com. Remove covers to pump and manually turn crank until piston is at top and look at ...
...cover removed and the fan exposed, plug the compressor in and spin the fan with your fingers...be quick as the fan could cut your fingers if you do not get them out of the way.. If the compressor ...
...compressor is oilless? Yes it has no oil. and you need to remove the top cover and check for air leak between the pump an the tank. if you have a large leak the tank will not fill. Two screws and the ...
Question about Air Lift Air Tools & Compressors
...compressor from the wall Is it 120 volt only or you have a choice ? You wire it for 240, if you have a choice The wiring diagram is on the outside of the motor or inside on the small cover, where the ...
Question about Campbell Hausfeld Air Tools & Compressors
cover? I have a Husky WL651004AJ which has not been starting up for family members lately and noticed a 50 ft extension cord was being used because of the distance from the power outlet. I moved
Question about Campbell Hausfeld Air Tools & Compressors
...cover and the booklet from the manufacture doesn't have anything related to wiring the compressor. HELP! Hello allti, Welcome to FixYa. My name is John, and I will be assisting you with your issue ...
Question about Air Tools & Compressors
...compressor around the country for about 14 years. thanks for the help. I can change the wiring and the plug my self if possible but another site seemed to talk in generalities and said that it would ...
Question about Porter Cable Air Tools & Compressors
compressor what tool do i use to remove motor cover what tool do i use to remove mpotor cover The screws used to hold the two halves of the motor cover together are torx drive or sometimes called star
could be bad. behind that cover is a centrifugal unloader that when the unit stops it reliefs all the pressure between the tank and the compressor head so the unit will not try to restart under a load
3 questions posted
Usually answered in minutes!
2 Questions
4 Questions
3 Questions
1 Questions