governor adjustment need to know what engine you have because they all adjust different but the rule of thumb... open throttle at carb all the way and pay attention to everything moving. then loosen ...
oil what wt. oil do you use in a generac 2700psi washer Contact company, they should be able to answer this. Rule of thumb 10-30 is a good all around oil.
...now i''m peicing it together to make it run,,,,it appears to be all there but had no spark. General rule of thumb for point gaps. 25 thou. Hacksaw thickness Should work fine.... it's not a precision ...
...Do you have the model and spec number for the engine? Is it the high speed or idle adjustment? Rule of thumb for high speed it turn in til snug and back of 1.5 turns; idle is 1 turn. Start
Question about Denso Electrical Supplies
what would cause it to stop shifting after being sprayed with waterhose it was shifting good befour i sprayed it now it just stays in first gear External controls or electrical components need ...
help. Start with checking the batteries, these are the "heart" of the unit and the easiest issue to rule out. You can get replacements online from www.batteryinternational.com
...the absence of a high voltage spark. The coil would but since you have already replaced it you can rule it out. So there are only two more things that can cause no spark. First trying to replace the ...
Question about Denso Electrical Supplies
not firing / turns over fine /have replaced all parts /eecu/coil/ iem 4.9 ltr 6 cyl 12volts going in coil on pos side 12volts coming out of neg side of coil and 12 volts coming out of high volt side ...
...air compressors) require much higher startup power than what is listed on the nameplate. General rule of thumb is to allow 2-3 times nameplate rating for generator rating. For example. If your air ...
check the voltage on these leads...should be around 30VAC..If this voltage is present then you can rule out the stator
12 questions posted
Usually answered in minutes!
-6 Questions