Rowenta Professional DX8800 Iron "torx screw" Questions

...screw head? I got the Torx security bit at Ace hardware for a couple of bucks Sears has the tamper proof torx bit sets that you need to remove the screws. Unfortunately they are sold in sets only and ...

...replace the power cord? Screws have a pattern I've never seen. Rowenta DM880 Iron They are called TORX screws. You need a torx set of

...screw head? A six-sided star? If so, then it is a TORX head. Look carefully at it, and determine whether or not there is a small pin sticking out of the center. The screw you are trying to remove is ...

...cannot open the appliance.....if they are like introverted star shape, then these are called torx screws, can be removed by ordinary torx-bit screw driver, available at most hardware

Torx head screw and you will need to get a set of tamper-proof Torx bits. Be certain the tamper-proof Torx bit will fit into a bit holder shaft ssmall enough in diameter to fit into any recessed holes

screw called "Torx tamper proof" call 925 8271011 and order "Rowenta tool" $10.00 plus shipping-this place also sells Rowenta parts go to home depot buy s single srewdriver or a multy size set. or wal

Screw on back of iron is loose. standard allen wrench doesn't fit. Probably what they call a torx head. If it has a tip in the center then it will be a security torx head. sets of torx head wrenches ...

...Torx screw size to remove cover from a DM 273 iron. The screw is recessed in a narrow 2 inch hole. It appears this is top secret information at Rowenta as I have not been able to get an answer from ...

...turns on and off when moving the power cable around. Can the power cord be replaced? There are two Torx screws on the bottom but the have a bump in the middle that prevents normal Torx screwdrivers ...

screw driver won,t fit. I am not familiar with your particular iron ... however, I am familiar with different types of "bits" I suspect yours are security "Torx". Torx look like a "allen" with points.