Rowenta DX6700 Iron "power cord repair" Questions

Ad

...power cord kit from the manufacturer. If you are not familiar with doing electrical repairs, you may want to have a technician do it. Insulation on the power cord is important for several reasons; ...

Ad

...can repair this yourself but you will have to take the handle apart to access the power cord inside the handle. Just pull the cord inside and wrap with electrical tape to hold in place. Hope this ...

Ad

Fix Rowena iron with retractable cord Power cord has short I would contact a small appliance repair business near you, they can supply the needed cord and the repair for very little money I would ...

...power cord for open or faulty 2) loose wires from the power cord to the foot pedal 3) foot pedal switch open or faulty, test the wires from loose or breake wires and repair 3) motor need repair , ...

Question about Black & Decker Irons

2 Answers

...power cord. I just repaired mine yesterday. It's just a matter of removing the 2 tamper resistant screws holding the back cover (heel cover) of the iron on, repairing or replacing the power cord, ...

...heating up, the power button is not lighting up. What is the solution? KENWOOD MODEL 848 broken cord at the plug or iron control in iron faulty repairs other than a cord will be more than a new ...

...thanks The power cord may be bad. When it does work, if the plug end or the wire at the straightener end gets hot, the cord needs replacing. Go to www.ghdfix.com they repair them for ...

...power cord if it has a break from the plug side.if not take it to a repair shop for repairs. the steamer has a element inside that gives off the heat if that goes bad then there is no where it can be ...

Question about Rowenta Irons

1 Answer

...cord around the power flashes on and goes off again, sometimes if I hold the cord an a certain position it will stay while I hold it in that position Help You have a short in the cord. If you knew ...

...paper. You should test the flexibility of of them to allow the work properly under heat. If are the cord connections are bad replace the terminals with ones os the same size or replace the power

Not finding what you are looking for?
Rowenta DX6700 Iron Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...