Rowenta DX6700 Iron "element" Questions

...not heat up THE LIGHT IS ON BUT THE IRON NEVER HEATS UP Hi. Either wiring is broken or the heating element is broken. The heating element is tested taking apart the iron, disconnecting element ...

Rowenta DX-8800 will not heat. Location of heating element? I opened the Rowenta DX-8800 so that I could replace the heating element but cannot locate it. Where is the heating element located within ...

...on when plugged into the outlet. Hi. Either the wiring to AC power line is broken or the heating element is broken. The heating element is tested taking apart the iron, disconnecting element ...

Shark model G1490 won't heat. Can heating element be bad? if lights are coming on its either the wire that send power to the heating element or the element itself

...up. hello, what his sign indicate is that there is disconnection of power connection over to the element i.e the heater (heat provider). what you need to do to fix up this problem is to open ...

...what will need is to service them from there dysfunction the problem of your iron could be from the element and the wire ,the element is the heat provider while the wire is the power supply from the ...

...not heating. I have had it for about 5 years and I use tap water in it. Possible that the heating element is open. You will need to check the continuity of the element, make sure that the

...leads, both the live and the neutral The temperature selector (Thermostat) The thermal fuses The element To do this testing you will have to strip the iron and get to the wire ends, the thermal ...

...light stays on. try opening the iron and see if the wires are connected to the thermostat/heating element, if not you can easily tie them again, it sometimes happens when the thermostat fails to ...