Question about Brother International Office Equipment & Supplies
...reset the drum counter as instructed below. 5.Make sure that the machine is turned on. For MFC users: To confirm you are installing a new drum, press 1. For DCP users To confirm you are installing a ...
...reset the drum counter via the printers control panel. 5.Make sure that the machine is turned on. 6.Press C / Return (?) Clear / Back. 7. To confirm you are installing a new drum, press ?. 8.When the ...
drum and reset the counter (Essentially the cartridge/drum unit should not be in the printer when you reset it) 1) Open front door 2) Remove the cartridge/drum unit 3) Hold down front button until all
Question about Brother International Office Equipment & Supplies
reset the drum units on the Okidata c5100, first time reset Can I reset the drum units on the Okidata C5100? They have never been reset..I just bought compatable toner cartridges, but I get an error,
Question about Brother International Office Equipment & Supplies
...drum. To reset the drum follow the instructions below: Open the front cover of the printer. Press and hold down Go button for about 4 seconds until al the LEDs light up. Once all 4 LEDs are lit, ...
...reset the drum unit counter? hello, first did you follow instructions of reseting machine when you replaced drum, if not here is the istructions, with machine in ready state, press go button and up ...
reset the drum unit dr 360? Thanks, Sergio email:[email protected] 1. The Drum LED blinks if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then
Question about Brother International Office Equipment & Supplies
...drum. To reset the drum follow the instructions below: a. Open the front cover of the printer. b. Press and hold down the white button (shown as blue in the image below) for about 4 seconds until all ...
Question about Brother International Office Equipment & Supplies
...drum. To reset the drum unit counter, follow the instructions below: Press Menu on the Control Panel. Press the Up or Down Arrow key to select Machine Info.. Press OK. Press the Up or Down Arrow key ...
3 questions posted
Usually answered in minutes!
11 Questions
11 Questions
7 Questions