Sanyo SR-3620 Compact Refrigerator "set" Questions

refrigerator quit frezzing at the temperator it normally is set at but if I set it colder it starts again And it should. If you set it colder it will try to reach the new setting. If you set it warmer

cannot keep fridge at proper temperture,keep trying different settings The fridge section runs off of the freezer.. Set the freezer close to recommended factory setting.. If you want things a little ...

The freezer will not go below 18 degrees set at the median setting GE TPX24PB side by side The freezer will not go below 18 degrees set at the median setting...the frige side is good at 39 set at the ...

top of fridge freezing with temperature on lowest setting probably will freeze as fridge settings get colder with the lower numbers 1 is close to freezing and 4 is probably where a fridge setting ...

...it Hi the following should tell you all the info about the controller Directions for Accessing and Setting G3 Series Digital Controllers Changing the Temperature Instructions for changing the

reset temp undo off button To Change Temperature Control Setting with Touch Pads: • Freezer setting is on the left side of the display. • Fresh Food setting is on the right side of the display. - ...

Brand new freezer set at 7 is creating excessive frost. Is it set too high or low maybe? Hi and welcome to FixYa. I am Kelly. Each brand or temp control is silghtly different than even a like model on

why is refrig so cold its freezing liquids it is set on the warmest setting but still keeps getting colder Good Morning Friend, I understand that your Frigidaire refrigerator, model# FRS23KF7AB, is so

My Amana refrigerator (15 years old) has to be set at high thurmostat setting to cool properly and freezer is not maintaining freezer temperatures even on high setting. Clean the condenser coils and ...

Hi what setting from 1 to 4 do I need to set my new Beko freezer on On my old freezer it had a digital display to show -18 but this has a manual know with a 1to 4 setting THE MEDIUM SETTING IS USUALLY