Sanyo EM-S8000 Microwave Oven "blow fuse" Questions

Ad

Question about Sanyo Microwave Ovens

1 Answer

blow the fuse after blowing the fuse?..what happened next?...did you replaced the fuse and it start running again or if you replaced the fuse, it will blow again? if it is always blowing the fuse, you

Ad

...fuse will blow because it gets hot, not because the current exceeds the fuse's rating. If this is the case, replacing the fuse holder would be in order. This is not to be confused with the situation ...

Ad

My Danby microwave model dmw111KSSDD stopped working altogether. It kept blowing my fuse, but would work again when I reset it. Now, nothing. Could it be the microwave fuse? It was having issues and ...

fuse to blow. It did that because one of the other switches is defective, or is not being actuated properly by the latch mechanism. Both the defective switch and the monitor switch need to be replaced

Question about Kenmore Microwave Ovens

1 Answer

...the fuse blows only when there is a short and it is overloaded, so check it for shorts before replacing the fuse and turning it on!! once the short is cleared the fuse will not blow!! reply and

MAGIC CHEF MODL MCO160UQ KEEPS BLOWING THE FUSE INSIDE THE MICROWAVE WHEN I CHANGE THE FUSE IT WORKS FOR AWHILE THAN BLOWS AGAIN CHECK THE FUSE CORRECT AMPS OTHER WISE BLOWS THE FUSE AND CHECK ANY ...

...fuse will blow. If the line fuse blows, the microwave won't start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace ...

Question about Panasonic Microwave Ovens

1 Answer

...fuse in the plug blow or the internal fuse if it blows the internal fuse it could be one of the door switches two of the switches have a red button on them and one has an orange button its normally ...

Question about Frigidaire Microwave Ovens

2 Answers

Frigidaire microwave FFmv164lsa keeps blowing fuse replaced the magnetron but still blowed the fuse, It sparked and blew the fuse. Disconnect connections at primary of the power transformer and try ...

Question about LG Microwave Ovens

1 Answer

...blow the fuse I replace fuse but blows when start up happens The Interlock Monitor Switch is an added safety check on the Primary and Secondary Interlock Switches. If the Primary and Secondary ...

Not finding what you are looking for?
Sanyo EM-S8000 Microwave Oven Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo Microwave Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66761 Answers

Are you a Sanyo Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...