Sharp CV-P09FX Portable Air Conditioner "keeps beeping press remote" Questions

...Press down and hold the Emergency button (ON/OFF )on the indoor unit then electrify. 3) Keep pressing the Emergency button for over 10 seconds until three short beeps are heard. The Auto-restart ...

...remote in to service mode to find out the error code. Simply hold the cancel button down until the display changes to 00 and then press it again. Keep pressing slowly and the display should change ...

...operation = Normal operation. Your unit is under timer set up. Please keep remote towards indoor sensor press timer on and change to 00.00 . If you get beep sound, switch off a/c and then

...Press the CHECK button on the remote controller continuously for 5 seconds. 3. "- -" will be displayed on the remote controller display. Note: Display only for "- -". (No transmitting signal, no ...

split AC 1200-BTU Kenwood Model ANK12P Pearl series Power lights ON but Unit does not become ON. Its power LED becomes ON but buzzer does not beep as it beeps with normal power ON,and no response from

...remote), you can't change speed. Keep cool mode and then press fan again and again still you get required speed. Suppose, as you said beep sound is there when you select speed, check related speed ...

press test button on remote control (rear side) and look how many times now operation and timer LED flashes. Note that. Then press MANUAL/AUTO button on indoor unit until you hear 3 beeps from buzzer.

...remote with mine and what you need to do is go to your unit while its plugged in and off press and hold the power button until it beeps and when it does unplug the unit from the wall let off of the ...

...remote as well so keep this in mind. Also if possible unplug it and let it sit for atleast a day then plug it into a different outlet (if possible) to see if there is any change in the units ...