...5 minutes to reset. Unit ran for about 5 minutes then shuts off showing C6 error code again.. Any solutions for this problem? First of all call the installer to check it. if you are the installer ...
...minutes, then shuts off. Power on buttons can restart process. App. 7-8 min.. and shut down.Try to check error code can get 5 flash yellow led on.What goes wrong. Refrigeration problem. Must be a bad ...
Question about Comfort-Aire Heating & Cooling
...5 min once i turn my unit on, it will run and then automatically shut off in a few minutes, the timmer i believe is off and says 00:00. I do not have the manual. Please help dose it have a thermostat ...
...5 minutes. When power is restored, turn your air conditioner to any cycle and let it run for 5 minutes before turning it off. I ask that you please follow up with a comment on the post, at your ...
Question about Heating & Cooling
...5 minutes? when it gets hot out the compressor kicks off about every 5 minutes. to start it back up all we have to do is shut the off then right back on compressor is getting hot. you can try and ...
Question about Comfort-Aire Heating & Cooling
...5 minutes the compressor kicks off. will not come back on. you can turn it off and back on and compressor will start back up again for about 5 minutes and does same thing over and over. compressor ...
...5 minutes then stop 3 minutes then run another 5 minutes and so on. This is called short cycling. It sounds like the compressor is getting hot and opening a bi-metal overload, which shuts the ...
Question about Hitachi Heating & Cooling
...and there has been codes 02 and 41 on different occasions it has shut off al Turned system off and then on again a few times Works ok for about 5 minutes then turns itself off need to recharge ...
...my roof top air ran for about 5 minutes then shut down, and won't work again. I have it plugged into a extenstion cord, check your power supply, 5 minutes is about the time it takes to blow a ...
...5 minutes and shut off no matter how low the surrounding temperature is try cleaning off the filter that is on the bottom in the back of the unit. It is a fail safe sensor that in the event the unot ...
76 questions posted
Usually answered in minutes!
51 Questions
23 Questions
29 Questions
54 Questions
12 Questions