Sharp R-753 900 Watts Convection / Microwave Oven "control panel light" Questions

...A MOMENT WHEN DOOR IS OPENED & CLOSED, BUT NOT STAY ON. ANY ADVISE bad control panel.. all power is routed through the control panel.. if your having a problem like that i would replace the

...best way to repair lights? Thanks, Len The problem lies in the circuit board / control panel. We regularly repair these control panel assemblies nationwide for 32.50. yahoo links dont work, what

...in the oven are seperate from the one in the control panel/clock. IF the control panel and clock dont work then it is not something that is easy to fix. Could be the fuse of the controller

...control panel all seems to work fine, but that is about it. Help! We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid ...

...control panel in place. Remove the screws and carefully pull the control panel forward. Locate the fuse holder on the right side of the control panel. Remove the fuse holder by pulling it out. Check ...

...control panel for the microwave. The oven will operate but the microwave will be totally dead (no light, no clock). Turn off the breaker for the oven at the fuse box (30 Amp double breaker). In order ...

...control panel on your microwave. For the lights to come on to start with the door being closed switches have to be working right and when you press start the lights come one. When the microwave is ...

...control panel doesn't light up, then your fuse is blown. unplug the microwave. unscrew the vent grill, (2) screws at the top of the microwave. then you should see 1 screw holding the control panel. ...

...holds it.remove that screw and the control board comes out.disconnect the wires from control board and remove remove the panel assly.then remove the screws that hold the control board to the

...control panel works, control panel counts down when start is pushed, light inside doesn't work nor fan or light under unit. I replaced fuse but wasn't the problem. Any ideas? I first noticed problem ...