Question about Plumbing
...fill valve is not opening correctly or is somehow clogged. First rule out the shut-off valve by turning it off, disconnecting the fill pipe from the toilet tank. Attach a hose to the loose end of the ...
...valve? and reprime the pump? also if the screen at the bottom of the well is plugged you wont get enough volume too fill antthing,and the bladder tank should only run about 2/3 full the pressure on ...
...replacing the bowl is far easier than fixing the vent problem. But before you replace it, you can test it. Remove the whole toilet from the floor. Elevate it on some blocks over a bucket. Fill the ...
the cap. Slowly turn the water back on. If you still have problems after completing this task. Replace the rubber fill valve seal or the whole valve. I do not think the supply line is the main problem
...the old ball **** design so it takes up less space in your tank & reduces the likelihood of problems down the line. Good
Toilet continues to run because the buoy (the black plastic piece filled with air) gets stuck and does not rise up as tank fills with water. This is an intermittent problem. I tried adjusting the ...
17 questions posted
Usually answered in minutes!
24 Questions
3 Questions
3 Questions
2 Questions
2 Questions