...led panel shows the bulb and the panel lights up again showing all buttons. However the buttons don't work when pressed. What could be wrong? The touch panel has malfunctioned, Suggest replacing ...
...LED lights went out. During a storm when our electricity flickered, the LED lights went out in our GE Advantium oven. The oven works just fine, except you can't see what setting you have selected. If ...
...LED Lights The Led lights on the control panel are very dim. They use to be bright but have gradually grown dim. Is there some adjustment I can make to increase the Led brightness?? Thanks Stacy We ...
led lights flickering hi i just bought and installed a stainless steel otr samsung microwave. once the installation was complete i proceeded to familiarize myself with some of the functions. I had ...
Question about RCA Microwave Ovens
...consult a dealer to have it replaced. Further investigation shows it has a fancy WIFI dimmable LED Bulb. Such things normally come as a module, so not just a case of unscrewing a bulb, however, ...
Question about GE Microwave Ovens
my microwave power is ok, led light ok, but dosen't work what problum? my microwave power is ok, led light ok, but dosen't work what problum? check the door switches....i had an over the ...
...led lights then solder 2 wires to the leds next use a 1k resistor on one of the wires then conect it straight to the power surply just after the bridge rectifier noteing+ and - I had the same problem ...
...somewhere on the top of the cavity. To make a high voltage diode tester, wire up a 9V battery, LED and a 220 ohm resistor. Hooked up one way the LED will light reverse the connection the LED
...on Stove lights do not come on when button is pressed. However you can hear a click inside when pressing button. Light are LED type. Night lights do not work either. power supply bad for the ...
97 questions posted
Usually answered in minutes!
275 Questions
129 Questions
117 Questions
86 Questions
95 Questions