...be as short as possible but could be 20 ft away. My inverter is a 2000 Watt continous and I use welding cable size 0 at about 3ft max between the battery and the
Question about ARC Electronics - Others
The settings for welding aluminium using a Tig200P AC/DC inverter If you are using a remote then you would set the machine in standard for controlling output and also to AC output, HF tig, contactor ...
...inverter brand new I tested it with jumper cables and it worked fine. then i hard wired it with #2 welding wire directly to the battery. I tested it with a 500w work light and it worked fine. then i ...
Question about PowerBright Electronics - Others
...needs to be able to handle. With copper cable, you need 2/O (Two Aught) gauge cable to handle this. Welding cable would be best, and it would need to be hard-crimped to the existing battery terminal ...
Need a hook up maual I know to use a 20amp breaker. What size wire should i use for about 50 feet. I am thinking a 10/2 wire would be ok? According to the specs for this welderYou need a 50 amp ...
...shoulds I use on my 2500 watt inverter I would use a minimum of #4 copper. I would get this as a welding cable type because of its flexibility. #2 size is a better choice if you plan on using the ...
...between the inverter and battery to control the power to the inverter. I would use a good #2 copper welding cable for the power leads. Now, if you are not planning on using the whole 1250 watts, then ...
Aluminium welding settings The settings for welding aluminium using a Tig200P AC/DC Inverter Check your manual or the welding rods data sheet. The settings depend on what you will weld. Consult online
Question about ARC Electronics - Others
Need operating instructions for Thermal Arc 190 GTS tig welder I'm an experienced tig welder with a Miller HF 250 tig/stick machine, just bought the Thermal Arc 190 GTS that has a bunch more controls,
15 questions posted
Usually answered in minutes!
13 Questions
10 Questions
6 Questions
4 Questions