...7 WILL WORK FOR A WHILE THEN STOPS disconnect the remote and see if the unit works properly; could be lost comm. between the burner control module and the burner assembly. If your getting error code ...
need to find min.and max.manifold pressure settings for tankless water heater.The remote only flashes code 76 norm point 7 of 1Bar hogh/pressure release blows norm just under b3Bar best of luck
...7-76 or C 8-76. We cleaned the filter but the problem is not going away. The hot water turns off after a couple of seconds of running. Can you e-mail us with instructions on how else we can fix this. ...
76.pdf 5) Error C4-13 can include part failure, vent problem, oxygen depletion, and can also include PC board failure. http://waterheatertimer.org/pdf/Error-code-13.pdf 6) Tankless routine maintenance
...7, and 8 all come up followed by a 76 all within two days Usually multiple error codes means PC board failure, but could also be overdue maintenance or other part failure, or simply a combination of ...
...7 error Turning off and back on worked yesterday--but not today. There was an interruption to electrical supply last week due to storm. Could that be causing the problem? And what is cure? Remove ...
...7 & 76 before when it would shut down we would pull the pour cord and wait a minute and plug it in again and it would start working fine. George Before calling service technician, open following ...
...7 and 76 the water turnes cold and the unit shuts off I called Rheem at 1-800-432-8373 and spoke to a technition who told me that the error code C7 76 meant that the mother circut board was shot and ...
Question about Rheem Water Heaters
7 code. I cleaned both water filter and air intake filters. What else can I do to fix this problem? I had the same problem and called the manufacturer. The error code C-8 was followed by the number 76
219 questions posted
Usually answered in minutes!
335 Questions
250 Questions
267 Questions
222 Questions
96 Questions