Question about Panasonic Televison & Video
power went out and tv not working. do I plug back in holding the on/off switch Try a reset and if it does not work, has to be open and check power supply board and the other boards. Good luck, Serge.
no power to tv i unplugged the tv from the wall by accident while the tv was on and now the tv has no power at all once i plugged it back in I would suspect bad capacitors on the power supply. They ...
power light red no sound no picture Red light is standby, it turns green when TV IS turned on. If the red light is flashing then there is a problem and number of flashers are a code to indicate a ...
Question about Panasonic Televison & Video
tcp42x5. Will now turn on after the the loss of power to the house. When the electricity comes back on the tv will not If your power to the TV is working as usual, then the problem is the main circuit
PANASONIC TCP42X5 WOT TURN ON? Check and replace its main power regulator board.
...tcp42x5 wont turn on Check its main power supply regulator board. It has the fault. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any ...
Question about Panasonic Televison & Video
have a panasonic plasma p42x5 the screen will not come on the tv you can hear a buzz and the indicator lite comes on but no pic Fault to the main power supply regulator section. Either it will be a ...
Question about Panasonic Televison & Video
tcp42x5 power supply keeps blowing fuse Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check
23 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions