Sharp R-1870 Convection/Microwave Oven "door align" Questions

Replaces door assembly on LG LMV1813SB successfully. However, door is now stuck and when I try to use the MW circuit breaker is tripped. door alignment not correct , fix correct alignment.

align the door yourself, then you will still have to get the oven leak tested. Just making a door snug does not necessarily mean you have low leakage. Microwaves have such a short wavelength that they

door will not close without slamming Mn T 9455 FX door not closing acts like the latch is not engaging without slamming the door Possible causes - door switch, or door switch assembly out of ...

Rival rgst902 microwave. Door won't open. verify that door is perfectly aligned with frame edge , sometimes in busy kitchens the door gets bumped and it no longer aligns with frame , if one forces it ...

My Sharp R1505 over the range microwave probably has a door switch out of alignment. The door itself is level and aligned. The unit will show the heating time but will not heat. It will heat if I push

Jenn-Air abovestove microwave door issue The door on my microwave will sometimes not close correctly. As a result the light inside stays on along with the power. I have to close the door additional ...

...the door - you have to manually open the door. Clean the door swith housings and re align the door. That should do it, any other problems will become apparent when you examine the door switch

...keypad problem The door is the simple bit. Loosen the hinge side of the door, (Underside hinge) and align the door hooks. The panel will require replacing as there is nothing to service on the

samsung microwave door wont close The door alignment or door contact switches will be out of position & will need re-aligned. As this is a very important safety issue for a microwave oven, I would

The microwave wont respond to the timer. It keeps cooking unless you open the door. After the timer runs out it seems like it cuts off but there is still a low buzzing sound and it is still cooking. ...