i just installed a water heater about 11:00 am today but still do not have hot water what could it be 1) Many times people turn ON the electricity before the tank is filled with water. This instantly ...
Question about Water Water Heaters
...11 Gas water heater ok for outside mounting No all water heaters need to be mounted inside. Helps with the equipment efficiency, corrosion due to exposure to the elements, possibility of incoming ...
...elements and everything is working, the only thing that can be left is that the dip tub has ruptured somewhere close to the top of the outlet. But I would put my money on a bad element. probably the ...
...elements, and a separate circuit breaker supplying power to each element? And testing across both hot leads coming from each breaker yields 238Volt? Copy following link for Bosch tankless manuals, ...
My AH-780 was installed 4 years ago to replace an Insinkerator, which rusted through after 11 years. It has since developed a slow leak out of the bottom of the unit, just as has been reported by ...
...11 grains hard water, and require minimum water flow and water pressure or sensors will shut down burner or element. 2) For example, tankless might turn on with 2/3 gallon-per-minute water flow, but ...
...11 grains of hardness. Tankless require softener and filter system which can affect line pressure and flow, which will adversely affect tankless unit. The problem could be clogged sensor, bad board, ...
336 questions posted
Usually answered in minutes!
46 Questions
41 Questions
21 Questions
16 Questions
15 Questions
