Canon MP280 COLOR INKJET - COPIER/PRINTER/SCANNER [CNMMP280] "scanner turned" Questions

dell a940 AIO makes noise as soon as i turn it on then displays unlock scanner - tried to but will not unlock Found this: http://support.dell.com/support/edocs/systems/a940/a940en1.pdf Page iv ...

...product displays one of the following error messages on the control panel when scanning or copying:Scanner failure, power off and onScanner System FailureScanner failed, cannot make copies or fax ...

scanner error 6 in my network printer always i'm getting this msg "scanner error 6 turn off then turn on" when i make turn off and turn on again same msg comming how can i solve this problem... in my ...

scanner not wanting to move scanner moving 1/2 inch and then returns home Scanner lock is enabled. Scanner lock is located below scanner where pages come out after printing near the left side. turn it

lexmark x5150 scanner locked just put in two ink cartridges have a new computer installed the printer scanner. when i turn on the printer it clicks and tells me to unlock scanner then press power, i ...

...light is on and the feed switch light and the alarm light and it says in the screen release the scanner lock switch and turn the power off and back on..Please help what is the scanner lock switch ...

Dell A940 - Unlock Scanner then press power The unlock scanner message appears. What am I supposed to do? Thanks. See http://support.dell.com/support/edocs/systems/a940/a940en1.pdf Page iv identifies ...

Scanner 5 error - turn off / turn on Scanner 8 error - turn off / turn on Scanner 2 error - turn off / turn on The laser assembly or main board might have an issue.

C6101 WHAT THIS BROBLEM C - 6101 The scanner home sensor does not turn on within a specified period of time after the scanner motor turns on.Dirty scanner home sensor or scanner motor abnormality.To ...

C30 code is as follows straight from the Tech Manual. .Timing switch fails to turn ON 2.5 sec after scanner motor starts to turn in normal direction. .Home position switch fails to turn ON 6 sec after