Sunbeam 5890 ExpressBake Bread Maker "pan paddle shaft" Questions

...paddle shaft in the pan, which is confusing since the shaft is steel and the paddle is aluminum. Anyway, I've looked on the web for a replacement pan assembly, with no success. Can't find any kind of ...

...pan, even with paddle attached the driveshaft falls/slides out of the bread pan, even when i have the paddle attached. Is there a rubber washer missing that holds it in tight under the pan?? OR is ...

...pan is empty,I turn round the mising paddle feeled very tight.Where I can repair it? Hi, The sealed bearing and paddle shaft can not be repaired. You will need to purchase a new bread pan..... Sorry. ...

...on the spindle. If the spindle isn't turning then your problem is underneath the pan or inside the drive and your paddle may be fine. Where might one find a seal for the paddle shaft model ...

...pan and letting it sit for a while will free up the paddle so it lifts off the shaft. Also lubricating the shaft with a squirt of olive oil will help stop the paddle from sticking on the shaft. Good ...

...paddle seemed to be a bit wobbly when mounted on the pan shaft. It looked like there was a lot of wear. The paddle being aluminum, I assumed the wear would be mostly on the paddle, so I ordered a ...

...pan & paddle out of machine and see if you can turn it by hand), or the belt has fallen off or has snapped. (Keep the bread pan out of the machine & run a knead cycle, look through the lid ...

...paddle isn't spinning. Clean out the pan and take it out of the machine. Put the paddle on the shaft and see it it spins freely. If it does not, then the shaft is stuck or the bearing is frozen. Next ...

...you "lost all your stuff" it could be the sealed bearing in the bottom of the bread pan has broken. The paddle doesn't turn and is leaking. If this is the case the bread pan needs replacement. ...

...correctly. If the motor shaft turns but the paddle doesn't then the sealed bearing that the paddle rotates on has failed and is frozen so the paddle does not turn.. You may need a new bread pan. ...