...handle up Rock it from side to side and pull very hard. Make sure you have the set screw completely removed. After years of use soap gets down inside the handle and around the shaft and can make them ...
...the cartridge. Handle has a set screw (probably an allen head) There should be a retaining nut holding the cartridge in. Unscrew it and pull the old cartridge out. You might have to pull pretty
...handle (not same brand as yours) was so hard to turn that it pulled the base around with it on the vanity when I jerked it. I used an Allen wrench to take out one of the set screws holding the handle ...
...Handle is hard to operate both off and on and going from cold to hot.Different directions but same handle remove trim to expose valve, apply stem-grease to valve with fingers and re-assemble. turn ...
...handle off, and removed the next nut from the top of the plastic valve. It looks like the valve should pull out, but it's not coming easy and I'm afraid to try real hard. They can be tuff to pull up ...
...then try to pull the handle up and off. If that is to hard before you break both the stem and the handle you may want to get a handle puller. You can buy a puller in any store that sells plumbing ...
...hard to turn handle. I removed the cold handle to find a plastic part that squeeks and is becoming difficult to turn. you can get a new cartridge for it or try pulling it out and putting some faucet ...
single handle faucet hard to pull on and push off. Really need to pull with force. replace the cartridge
On and off handle becoming very stiff hard to manuver the handle. Thanks. change the insert or washer thank you for useing fixya please rate me
Question about Danze Plumbing
...hard should I pull the handle? Alot of variables there. If it's really old you must be extremely gentle. I have had them crumble into pieces in my hand. If it doesn't appear corroded around the edges ...
33 questions posted
Usually answered in minutes!
