Toastmaster 1142 Bread Maker "one side" Questions

one side of the post is kind of flat and the other side is round. You need to line up the flat side of the hole in your paddle with the flat side of the post and then it should slip right on. You know

when making 3lb whire bread one side bread perfectly nice browned top the side not browned and bread is doughy Call Customer Service at 800-231-9786

...one side. Pan seems to engage properly and not pop out. Both white and pumpernickel loaves came out lopsided. Raisins I added as "extras" to pumpernickel were not kneaded into bread and were baked to ...

one side. My husband says the shaft is about 4/16th or 5/16 in. radius. Where do I get the right blade? [email protected] You can buy one here on ebay. this looks like the only place. http:

...out is run a knife around the sides? I have the same problem too, I just use a plastic or silicone spatula, the kind that you use to scrape the cake mixture off the sides of the bowl, just use ...

...as there is a split at the side join of the liner try using 1 tablespoon less liquid on your next loaf. If it still collapses on the next one use 2 tablespoons less liquid. One of those should

...one of the metal ones coated with Teflon I would advise something different.  Since it is plastic you will need to soak it again overnight with some soapy water.  Tomorrow get a toothpick ...

...one on the left side, rock it up enough to get a small screwdriver inside, then push back the soft plastic fingers to release the housing -- force it a bit, you won't break it). You do not need to ...

...one side and the mixer thinks there is a problem. I tend to watch the initial kneading process for 5 mins or so and if it is sticking over one side, I tilt the machine to balance it up and get the ...

...one with The drive system I have has a large white plastic pully wheel on one side and a small silver pully off the motor. These are no ribs on either one... did you ever find a belt for your